130 Watt medium wave power-amplifier for 136 and 480 kHz
Specifications |
|
Maximum output 130W HF (measured after a 5-pole low-pass filter) |
|
The PA works in D-mode |
|
Control power: +17...+23dBm (50....200 mW) |
|
When control power is ready, the PA is turned on automatically (no PTT Cond. required) |
|
Gain about 30dB |
|
Housing dimensions : 160 x 100 x 40 mm (without heatsink) |
|
Housing dimensions : 160 x 100 x 80 mm (with heatsink 0,6 K/W) |
|
Efficiency about 75% (measured after a 5-pole low-pass filter) |
|
No built-in low-pass filter |
|
Connectors : SMA |
|
Power supply: 30 V DC, about 7 A; No Reverse polarity protection built in! |
|
Output voltage for relay etc : 13 V DC / 0,5A (derived from the stabilized 30V) |
|
No longer available |
|
Back to the medium wave components |